" /> Switches & Dimmers - Flush 2 Relay | HSA Tech

QUBINO

Flush 2 Relay

Operating Voltage: 230Vac/60Hz 120VAC/50HZ

Operation Temperature: 0 ~ 60°C

Maximum Load: 5A (1200W)

Electricity consumption: <30mw

Range: 30m line of sight

Dimensions (HxWxD): 48 x 49 x 18mm - we recommend a 45mm deep backbox as a minimum

Flush 2 Relays

This module is used for switching On or Off 2 electrical devices like light, fan, oven, washing machine, iron, power socket, garage door, electric radiator, water heater, etc.

The most simplified installation

Extremely small size and special designed casing ensure the most simplified installation (ease of cabling fixing) inside a flush mounting box. Proved and tested by professional electricians.

  1. Remove the switches from the box. Disconnect the wires from the switches.
  2. Connect the wires to the Qubino module. Insert Qubino module in the box.
  3. Fix the switches to the box.

Reduce energy consumption, decrease your electricity costs and contribute to a greener environment

Extremely low own energy consumption, less than 0.4 W. Module is measuring the power consumption of the connected electrical devices in Watts and total consumption in kWh. The power consumption data can be easily collected and aggregated without any additional costs.

Additional functionalities, make your home even more connected

The module can be used as an extension for control the heating/cooling system. The module has the option to connect a digital temperature sensor.

Top quality and long durability

We believe that products should be made to last, therefore we have selected only top quality electronic components. Safety test of temperature rise, construction requirements, insulation resistance and electric strength, overload test according to EN 60669-2-1 standard done by an independent institute (SIQ - Slovenian Institute of Quality and Metrology).

//]]>